RESUMO
A carrot seeder that utilizes a cylindrical component serving as both hopper/metering device to deposit seeds precisely into planting beds/hills at a uniform interval along a straight row over a plant bed was developed in this study. The seeder was evaluated at different operating speeds (89, 70, 61, 51, 48, 38, and 34 cm s-1) relative to mean number of seeds planted in each hill, hill center, scattering distance ratio, hill spacing and missed hills. The seeder was able to deposit seeds in each hill ranging from 2.8 to 4.0 at all speeds. The mean hill center and missed hills suggested that the seeder is best operated at speed under 70 cm s-1 with the respective values ranging from 0.9 to 1.6 cm and 0-5.5%. This indicates that number of the seeds dropped per hill was very uniform, which is a good indicator of the seeding performance. The hill center and missed hills at 89 cm s-1 were 3.08 cm and 16.67% respectively were significantly higher than at lower speeds. Other operating performances such as the mean number of seeds deposited in each hill and the distance between hills did not appear to vary with the planting speed. The scattering distance ratios of operating speeds from 34 to 61 cm s-1 were less than 30% and therefore acceptable for hill dropping of carrot seeds.
Assuntos
Daucus carota , SementesRESUMO
Effects of different soil tillage and sowing systems (Conventional Soil Tillage CST: Moldboard plow + gobble disc + disk harrow + harrow + sowing machine; Reduced Soil Tillage RST: rototiller-combined soil tillage machine + sowing machine; Ridge Sowing RS: gobble disc + ridge-sowing machine; Direct Sowing DS no-till) on plant development and emergence traits of second-crop soybean were investigated in this study under Antalya provincial conditions. Experiments were conducted over the experimental fields of the Aksu Branch of Bati Akdeniz Agricultural Research Institute for 3 years (2013, 2014, 2015) as a fixed experiment. The number of days to 50% emergence, number of days to 50% flowering, plant height, number of pods per plant, the first pod height, number of plants per m2, 1000-seed weight, and yield were considered as plant development parameters. Mean emergence time, germination rate index, emergence ratio, space ratio, tillering ratio, and acceptable plant spacing ratio were considered as plant emergence parameters. Different soil tillage and sowing systems generally had significant effects on investigated traits at p<0.01 and p<0.05 levels.
Efeitos de diferentes sistemas de preparo do solo e de semeadura (preparo convencional do solo - CST: arado de aiveca + disco de pastilha + grade de disco + grade + semeadora; preparo do solo reduzido - RST: máquina de preparo do solo combinada com rototiller + máquina de semeadura; semeadura em crista - RS: disco de gobble + semeadora em crista; semeadura direta - DS - plantio direto) sobre o desenvolvimento da planta e as características de emergência da soja de segunda safra foram investigadas neste estudo nas condições da província de Antalya. Os experimentos foram conduzidos nos campos experimentais da filial de Aksu do Bati Akdeniz Agricultural Research Institute por 3 anos (2013, 2014, 2015) como um experimento fixo. O número de dias para 50% de emergência, número de dias para 50% de floração, altura da planta, número de vagens por planta, altura da primeira vagem, número de plantas por m2, peso de 1000 sementes e rendimento foram considerados como parâmetros de desenvolvimento da planta. Tempo médio de emergência, índice de taxa de germinação, razão de emergência, razão de espaço, razão de perfilhamento e razão de espaçamento de plantas aceitável foram considerados como parâmetros de emergência das plantas. Diferentes sistemas de preparo do solo e de semeadura geralmente tiveram efeitos significativos nas características investigadas nos níveis p <0,01 e p <0,05.
Assuntos
Solo , Glycine max , Produção AgrícolaRESUMO
Soil compaction is one of the main negative factors that limits plant growth and crop yield. Therefore, it is important to determine the soil resistance level and map it for the field to find solutions for the negative effects of the compaction. Nowadays, high powered communication technology and computers help us on this issue within the approach of precision agriculture applications. This study is focused on the design of a penetrometer, which can make instantaneous soil resistance measurements in the soil horizontally and data acquisition software based on the GPS (Global Positioning System). The penetrometer was designed using commercial 3D parametric solid modelling design software. The data acquisition software was developed in Microsoft Visual Basic.NET programming language. After the design of the system, manufacturing and assembly of the system was completed and then a field experiment was carried out. According to the data from GPS and penetration resistance values which are collected in Microsoft SQL Server database, a Kriging method by ArcGIS was used and soil resistance was mapped in the field for a soil depth of 40 cm. During operation, no faults, either in mechanical and software parts, were seen. As a result, soil resistance values of 0.2 MPa and 3 MPa were obtained as minimum and maximum values, respectively. In conclusion, the experimental results showed that the designed system works quite well in the field and the horizontal penetrometer is a practical tool for providing on-line soil resistance measurements. This study contributes to further research for the development of on-line soil resistance measurements and mapping within the precision agriculture applications.
